Retro Fit Bungalow Bathroom Project
Requirements
CTE Services were called in to help design and install a new wet room and mechanical
ventilation heat recovery system.
Scope of Works
CTE’s design engineers worked closely with the customer and manufacturers to help guide
him with this project. Having listened to the customers requirements we proceeded to
design an MVHR system and wet room which included a state of the art wall hung toilet that
also acted as a bidet and heated toilet seat with the touch of a button.
The MVHR system was also installed with the ability to control it via an app to make it easier for the customer. We looked at the heat loss in the new master bedroom and fit new pipework and a new radiator.
Challenges
Our engineers faced a few challenges with this project, mainly with the installation of the duct work within the customers loft for the MVHR, due to limited space to work in.
However, once we were able to overcome this small issue and the installation ran smoothly from then on.
Key Project Details
- Installation Date: April 2024
- Property Type: Retrofit Bungalow
- Products Installed: New Bathroom & MVHR (Mechanical Ventilation with Heat Recovery) which provides fresh filtered air into the bungalow whilst retaining most of the energy that has already been used in heating within the building.